Compulsory Certification of the Character of the Federal Communications Commission (FCC) requires standard EMC factories to test non-essential technical information voltage 120 Vac frequency 60 Hz plugs NEMA 1-15P CSA CAN/CSA-22.2 No. 21-95, NEMA 5-15P, NEMA 6-15P, NEMA 6-20P FCC Certification FCC (Federal Communications Commission, Federal Communications Commission) is the United States Government. An independent body that is directly accountable to Congress. The Engineering and Technology Department of FCC is responsible for the technical support and equipment accreditation of the Committee. According to the Federal Communications Regulations of the United States (Part 47 of CFR), all electronic products entering the United States need to be certified for electromagnetic compatibility (except for products specified in some relevant provisions), which is called FCC certification. According to the relevant section of the Federal Communications Regulations of the United States (CFR 47), all electronic products entering the United States need to be certified for electromagnetic compatibility (except for some products specified in the relevant provisions). Among them, there are three common certification methods: Certification (FCC ID certificate), DoC (self-declaration), Verification (self-certification). There are great differences in the certification methods and procedures of these three products. There are relevant provisions in the FCC for the certification methods that different products can choose. The severity of its certification decreases. I. FCC Verification self-certification can issue such reports as long as the laboratory has obtained FCC accreditation. The main products include AV products, corded telephone, ordinary household appliances, digital equipment other than PC and peripheral equipment, CASSA equipment. BORY certification cycle: week II. FCC DOC self-declaration can only be issued by laboratories authorized by A2LA (American Laboratory Accreditation Association) or NVLAP (National Laboratory Accreditation System). Only manufacturers can label their products with FCC logo and sell them to the United States. Main products: IT products, PC and PC peripheral equipment. BORY certification cycle: 1-2 weeks III, FCC ID certification FCC to the applicant submitted samples (or photos) and test data audit, if the requirements of FCC rules are met, the equipment is authorized a FCC ID number. Equipment for certification include low-power transmitters such as cordless telephones, remote controls for automatic doors, radio remote control toys and safety alarm systems, devices for intentionally transmitting radio frequency energy in Part 15, industrial, scientific and medical equipment used by consumers of Part 18, automatic frequency conversion receivers and super-regenerative receivers, television interface devices, and home computers and their related devices. Peripheral. The responsible party shall make the equipment marked with FCC ID: Note: If a certain equipment is suitable for two or three recognized types, the responsible party shall select it. FCC Certification Procedure 1. Conformity Statement The responsible party (manufacturer or importer) will inspect the product in the qualified inspection organization (BORY) designated by FCC and make a test report. If the product meets the FCC standard, the corresponding label will be attached to the product, and the relevant FCC standard requirements will be declared in the user's manual, and the test report will be retained for FCC to request. 2. To apply for ID, first apply for a FRN to fill in other forms. If the applicant is applying for FCC ID for the first time, a permanent Grantee Code is required. While waiting for FCC approval to distribute to Grantee Code, the applicant should take the time to test the equipment. The FCC should have approved Grantee Code by the time all the material required by the FCC is ready and the test report has been completed. The applicant completes FCC Form 731 and Form 159 online with this Code, test report and required material. After receiving Form 159 and remittances, the FCC began to accept applications for certification. The average time for the FCC to accept ID applications is 60 days. At the end of acceptance, the FCC will send the Original Grant of the FCC ID to the applicant. After the applicant has obtained the certificate, he can sell or export the corresponding products. 3. Data preparation: To apply for FCC Verification, FCC DOC manufacturers only need to provide samples, circuit diagrams, series of differences (if any). Information required for applying for FCC ID: 1. Sample 2. Service application form, (NS provided form, completed and signed by the applicant) 3. Authorization letter (NS provided form, completed and signed by the applicant): Project and certification Authorization Letter Certification Agreement FCC Authorization Letter Confidential Letter (application for confidential service must be signed) or Non-confidential Letter (no). Application for Secret Service must be signed 4. Technical Specification, including the following contents: A. Frequency: to specify the frequency range, or detailed frequency point B. Modulation: working mode, such as FM, HFSS, DSSS, UNPS, GSM, CDMA, etc. If it is HFSS mode, its principle should be written out C. Antenna Specification: products with external antennas (such as walkie-talkies) to give. Antenna Gain D. Output Power (actual measured output power deviates 5% from the customer's nominal allowance, otherwise Fail) 5. use Manual (instructions) should pay attention to the warning 6. Chematics (circuit diagram) E. Circuit diagram: To mark component parameters, antenna F. component location 7. lock Diagram (block diagram) should have antenna, and Circuit Description (Line Description) describes circuit diagrams/principles in a literal manner. 9. Turn up procedure Note: Low-frequency wireless products do not need to provide this information related to voice products (such as microphones, walkie-talkies) to provide LPF (Low Pass Filter) input and output points all Licence products provide "bandwidth" parameters